Q. I'm a paranormal investigator and am looking to use my camcorder only at night. I know that I have to purchase IR lights. How do I attach them? Also, do I need to remove a blocker from inside the lens?
A. The IR lights can be used independently from your cam. Just point them in the same direction as the camera lens.
Unless you have a videocam with a nightshot setting such as some of the Sony models, you will have to remove the anti-alias filter in front of the imaging sensor. Whether removing this (often tiny) filter is economically viable, is very debatable because after its removal the distance between the lens and sensor must be recalibrated, and requires specific knowledge of the camera type used, and quite often, special instruments with very fine tolerances.
Before having your camera converted, you could try whether its IR sensitivity is enough to pick up some of the IR beams of your IR illuminator. A simple test will do: point the IR remote of your tv set towards your camera in the dark, press a few buttons on your remote, and check whether or not your videocam recorded any of the IR signals/flashes from your remote. This will give you an indication of the IR recording capabilities of your camera.
Alternatvely, you could look at various night scopes with a so-called video-out jack. They can be expensive, but the $398 Yukon Ranger 5x42 LT for instance (see link below), has a (NTSC) video output which lets you attach a (portable) video recording device, and has built-in IR flashlight.
Addtional edit:
On sale now by Thinkgeek: http://www.thinkgeek.com/electronics/cameras-photography/e5b5/
Unless you have a videocam with a nightshot setting such as some of the Sony models, you will have to remove the anti-alias filter in front of the imaging sensor. Whether removing this (often tiny) filter is economically viable, is very debatable because after its removal the distance between the lens and sensor must be recalibrated, and requires specific knowledge of the camera type used, and quite often, special instruments with very fine tolerances.
Before having your camera converted, you could try whether its IR sensitivity is enough to pick up some of the IR beams of your IR illuminator. A simple test will do: point the IR remote of your tv set towards your camera in the dark, press a few buttons on your remote, and check whether or not your videocam recorded any of the IR signals/flashes from your remote. This will give you an indication of the IR recording capabilities of your camera.
Alternatvely, you could look at various night scopes with a so-called video-out jack. They can be expensive, but the $398 Yukon Ranger 5x42 LT for instance (see link below), has a (NTSC) video output which lets you attach a (portable) video recording device, and has built-in IR flashlight.
Addtional edit:
On sale now by Thinkgeek: http://www.thinkgeek.com/electronics/cameras-photography/e5b5/
Anyone know where i can buy a camcorder with night vision online?
Q. Me and my friends are going to spend the night over at a haunted house next month and we want to record everything with a night vision camcorder.
$400 budget.
$400 budget.
A. The Sony Handycam is a good inexpensive choice with night vision, check it out here:
http://www.amazon.com/gp/product/B00123UGTO?ie=UTF8&tag=innovatincuba-20
http://www.amazon.com/gp/product/B00123UGTO?ie=UTF8&tag=innovatincuba-20
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar