Senin, 25 November 2013

Will a camcorder purchased from the US be compatible in Australia?

Q. I'm talking about stuff like cables and chargers. Would there be any problems using a camcorder bought from the US in Australia?

A. You would need to use a current converter to charge a US-spec device in Australia. The video cables will work if the corresponding ports are present, but the signal the US-spec camera records will only play on TVs and monitors that can handle NTSC.


What are some good camcorders to buy?
Q. Could you suggest some good camcorders to buy? I want it to have a clear picture and audio, and for it to look professional. Any suggestions?

A. Consumer level HD camcorders have 4 problems. 1) Blurry, fuzzy, out of focus areas closely around people in videos taken by consumer level HD camcorders. 2) Any movement, even a wave or lifting an arm, while in front of a recording consumer level HD camcorder, results in screen ghosts and artifacts being left on the video track, following the movement. Makes for bad video, sports videos are unwatchable. 3) These Consumer level HD camcorders all have a habit of the transferred to computer files are something you need to convert, thus losing your HD quality, to work with your editing software. 4) Mandatory maximum record times - 1 hour, 30 minutes, 8 minutes, 3 minutes – four different times advertised as maximum record time for some consumer level HD camcorders. No event I have ever been to is that short. Either take multiple camcorders or pack up with out getting the end of the event on video. Not to mention, but the computer you upload your HD files to jas to have at least a 1 GB video card and a separate Audio card that can support Direct X 9 technology, you normal every day computer has massive troubles with HD video. Consumer level HD camcorders interpolate the video. This means they take one frame, make up the next 4 or 5 frames, take a frame and repeat this, over and over, for the remainder of the video, every video it takes is like this. With a MiniDV tape camcorder, record 60 or 90 minutes ( camcorder settings), 90 seconds or less to change a tape and record for 60 or 90 more and repeat till you run out of tapes.

You can get a Canon ZR960 for $250. It is a MiniDV tape camcorder, has a MIC jack. You will need a Firewire (IEEE1394) card ($25 to 30) for the computer and a Firewire cable (less than 10) to be able to transfer video to your computer. To say this is not HD, think about this. It would cost in excess of $3500 to get a HD camcorder that could equal the video Quality of a $250 Canon MiniDV tape camcorder.

http://www.canon.co.uk/For_Home/Product_Finder/Camcorders/High_Definition_HD/HV30/index.aspx





Powered by Yahoo! Answers

Tidak ada komentar:

Posting Komentar